Description
Cell Phone Interceptor And Locator Professional
System Functions:
* Call/SMS Interception Target Identification/Live Call Detection On Map
* Auto Recording During Absence Of User
* Supported Codec’s: LPT-RPE, EFR, HR, AMR, AMR- Narrowband/Wideband
* Caller Identification On The Bases Of IMSI/TMSI, MSISDN And Classmark
* Decipher Protocol: A5.3
* Automatic Or Manual BTS Selection By User
* Target Set By Priority
* Maximum Number Of Calls Can Be Monitored Per Unit 8 – 32 Channels Duplex
* Data Receiving From Our Universal IMSI Catcher or Our Other Interception Units
* Inherits All The Properties And Functionality of Universal 3g IMSI Catcher Units
Location Functions:
* Target Identification/Live Call Detection On Map
* Plot Targets On The Map
* Blinking Target On Map
* Unit Location On The Map
The System Specification:
The GSM Interceptor Is Supplied With The Following Parts And Accessories:
* Multi-Band Receivers Built Into Lightweight Portable Box
* Industrial Portable Computer And Full Operating Software For Interception
* GSM High Gain Directional Antennas
* 220v Power Supply And Conversion Units
* Must Be Stationary While Operating
* Can Be Vehicle Mounted
* System Monitors 12 BTS’s As Standard.
* System Can Be Delivered With 12 To 32 Duplex Channels.
* The Number Of Simultaneous Calls That Can Be Recorded Is Equal To The Number Of Duplex Channels.
Technical Details:
* Frequency Band:1920 MHz -1980 MHz And 2110 MHz – 2170 MHz (Frequency Division Duplex) UL And DL
* Carrier Spacing: 4.4MHz – 5.2 MHz
* Range Forward/Down-Link: 8 km
* Range Reverse/Up-Link: 1 Km
* Audio Format: .wav, .MP3
* Decipher Time/Working Mode: 4 Seconds/Passive
* Receiver Type Wide Range Receiver
* Hopping Mode: Supported
* Demodulator: GMSK, PSK, 8PSK, QPSK
* Logical Channel
* BCCH, PCCH, CCCH, MCCH, DCCH, DTCH, MTCH, PBCH, PCFICH, PDCCH, PHICH, PDSCH, PMCH, PUCCH, PUSCH, PRACH, DL-SCH, UL- SCH,RACH
Voice Coding: AMR Codecs (4.75 kHz – 12.2 kHz, GSM EFR=12.2 kHz) And SID (1.8 kHz)
* Channel Coding: Convolutional Coding, Turbo Code For High Rate Data
* Duplexer Needed (190MHz Separation), Asymmetric Connection Supported
* Tx/Rx Isolation: MS: 55dB, BS: 80dB
* Receiver: Rake
* Receiver Sensitivity: Node B: -121dBm, Mobile -117dBm at BER of 10-3
* Data Type: Packet And Circuit Switch
* Pulse Shaping: Root Raised Cosine, Roll-off = 0.22
* Channel Raster: 200 kHz
* Channel Bit Rate: 5.76Mbps
* Frame Length: 10ms (38400 Chips)
* Number of Slots / Frame: 15
* Number of Chips / Slot: 2560 Chips
* Handovers: Soft, Softer, (Interfrequency: Hard)
* Power Control Range: UL 80dB, DL 30dB
* Decoder For Protocol A5.1, A5.2, A5.3
* Speech Codec: LPT-RPE, EFR, HR, AMR, AMR- Narrowband/Wideband
* Channel Structure: TDMA/FDMA/WCDMA
* System Software: SAPPHIRE-3G
* O.S. Ubuntu-10.4 Lucid
* Audio Format: .wav, .mp3
* Power Supply 220 VAC, 50 Hz; 110 VAC, 60 Hz
* Operating Temperature Range + 5 ¢XC … 40 ¢XC
* Control/Display Unit (Notebook- Ultra Fast)
* Power Supply Cable 230VAC
* Multiband Antenna
Click Here To Download The End User Certificate Please Complete It And Send It Back To Us Asap.
Please Contact Us For Pricing.
Reviews
There are no reviews yet.